Auxiliary equipment for die casting
The auxiliary equipment of the die-casting machine refers to various devices and systems used to assist the die-casting machine in the production process.
These auxiliary equipment not only improve the automation level of die-casting production, but also significantly enhance production efficiency and product quality.
Haichen also leads the industry’s highest manufacturing technology for die casting auxiliary equipment.
Haichen auxiliary equipment of die-casting machines plays an indispensable role in modern die-casting production, achieving efficient and high-quality production goals through the collaborative work of multiple devices
A list of die casting auxiliary equipment
The list of the auxiliary equipment for die casting:
- Auto Ladler
- Auto Sprayer
- Extractor
- Vacuum machine
- Auto conveyor
- Melting furnace
- hydraulic trimming machine
- Mold temperature controller
- Release agent mixer
- cooling chiller
Auto Ladler: used to feed molten metal into die-casting chamber, ensuring that the metal liquid can evenly fill the mold.
Auto Spray: used to cool or lubricate the mold during die-casting to prevent overheating of the mold and improve product quality.
Extractor: used to take out the products from the mold.
Vacuum machine: Extract air from the mold to maintain a vacuum in the mold cavity, allowing the molten alloy to enter every corner of the mold more smoothly.
Auto conveyor: Carry on the product, cool it outside the mold, and transport it to the designated location.
Melting furnace: Melt the alloy, and keep the temperature for the melt alloy.
Hydraulic trimming machine: used to remove burrs and excess material from the edges of die-casting parts, usually used for processing large die-casting parts.
Mold temperature controller: used to control the temperature of the mold, ensuring that the mold works at the optimal temperature, thereby improving product quality and mold life.
Release agent mixer: automatically mix release agent and water according to the set ratio, ensuring that the diluent of the release agent reaches the desired concentration of mold.
Cooling chiller: used to supply the cooling water for the machine and mold.
Auto Sprayer
Auto Ladler
